Among the many complicated parts of a car, one should always be knowledgeable in managing and handling all of them. Who drives a car without knowing where his coil springs are located? And what is an oxygen sensor? How about the head gasket? Because most of the car's compression is caused by a good head gasket. One can not just run a vehicle without thinking about his car's good compression.
Volvo, the Swedish genius behind the evolution of modern cars today, is continuously innovating its technology to better serve its loyal patrons. They are responsible for most of the production of trusted quality car parts, and they make it easier for drivers to locate their coil springs, oxygen sensors and head gasket. How? Because these parts are sure to function without fail.
Among the best-in-class products of Volvo is the Volvo Head Gasket. The Volvo Head Gasket is a gasket between the engine block and cylinder head in an internal combustion engine. Its purpose is to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinders.
There are three types of Head Gaskets with different makes. There is an MLS gasket or a Multiple Layers Steel which could be commonly found in most modern head engines. These typically consist of three layers of steel. Another one is the Solid Copper. A solid sheet of copper, and typically requires special machining called "o-ringing" that places a piece of wire around the circumference of the cylinder to bite into the copper. Last is the Composite, which is an older technology made from asbestos or graphite, but is becoming rare nowadays because it is more prone to blowouts.
Sometimes, the compression in the cylinder may cause a leak to form in the gasket, usually referred to as a “blown” head gasket. Fortunately, this will be a rare occurrence when a car is hooked up with the Volvo Head Gasket. Because for nearly 80 years of service, Volvo is almost sublime.
No comments:
Post a Comment